Service kit HP6032 for Teleflex Seastar and Baystar hydraulic helms includes standard replacement and wear items such as o rings, seals, washers, nuts etc.
The item was added to your wishlist.
The item was added to your shop cart.
HP603 Kit includes part no.
Nut 5/8NF Jam Nylok
Quad Ring .210 70DUR N
Mld Plate Seal New SS
I have seen this kit for sale online in various places via the part number. Sometimes I see it with 4 nuts included in the kit but not the 3 screws and sometimes I see the kit with 3 screws included but not the 4 nuts? What's the deal?
The kit has 3 screws and 1 large nut
It appears instead of four nuts it now comes with 3 screws.
JD Tech Team
Trying to find a replacement from seal piece for my existing Telefax system. We ordered this kit and it is smaller than the one on the system. We do have to use a steering wheel puller to take the wheel off so trying to avoid pulling that as much as possible. Is there another kit out there I am overlooking?!?!?
There is a TEL-HS5147 kit for older model bay star helms # HH4016 & HH4015
JD Tech Team
Is this kit good for the tilt helm also?
This is for Seastar Helms 1990 - newer, Baystar HH4313, HH43133-3, HH4315, HH4315-3
yes,mine was tilt helm
Sorry. I don't know the answer to that. My helm was fixed. The kit did have the parts I needed to stop the leak.
Yes. I used it on mine last year.
Is there a special bolt to mount the steering ram to a 225 Honda and is the ram on the top or bottom of the arm?
Not sure about Honda but Yamaha has a shoulder bolt so it can tighten but still swivel
my helm leaks atm the base where it meets the center console there are no leaks on the shaft where the steering wheel mounts up what kit do i need?
my helm also leaked at the base where it mounts to the console. I used the service kit 6032 and replaced all of the washers - 2 sides and steering. It no longer leaks and at a much more affordable price than replacing the helm.
The kit should contain 3 screws, the lock nut, the shaft key, and the seal.Seastar document 767328