The Perko Vented Fill for a 1-1/2" hose has an angled neck to accommodate any space.
Available in your choice of a Gas fill model with durable black plastic body and cap, or a Water fill model (special order only) with black plastic body and chrome cap. The tank vent is integrated into the design, complete with flame arrestor and anti-surge valve.
Each model includes a retainer and deck plate key.
Also available are replacement caps with retainer for each model (special order only).
The item was added to your wishlist.
The item was added to your shop cart.
Vented Fill Specifications
For Hose Size: 1-1/2"
For Vent Hose: 5/8"
Length of Neck: 2-7/16"
Screw Size: #8
Angled Gas Fill (shown)
Black/Plastic Body and Cap
Replacement Gas Cap/Retainer ONLY
Black/Plastic Cap/Retainer Only
Angled Water Fill
Black/Plastic Body and Chrome Cap
Replacement Water Cap/Retainer ONLY
Chrome Cap/Chain Only
What diameter is the flange portion of this part? The part with the screw holes in it.Thanks John
John B,The outer diameter of the black plastic flange is 3.25" which is the same diameter of the metal outer cover.I have a couple of pictures of it installed on my 22' GW but I am unable to attach the pics with this link.
Right size cap, but says Water not Gas
This was the right cap for my boat, but it is stamped Water, not Gas as in the picture. Description says water cap, so I should have known. Works for my needs, but could cause problems if you have water and gas fills. Small consolation is that I tried to order one through West Marine, they got one stamped Diesel. Go figure.
Better than the old design used by the boat manufacturer that had a plastic cap