Pettit EZ Bilge Paint
Pettit Z-Spar Pettit paint
  • Pettit EZ Bilge Paint

Pettit EZ Bilge - High Performance Bilge Paint

Pettit EZ Bilge paint is a durable high-performance alkyd finish specially formulated to withstand the abuses associated with boat bilges. This hard-wearing finish resists abrasion, antifreeze, grease, gasoline, diesel fuel, and engine oil.

EZ Bilge will stand up to years of wear. Its high-solids formula is easy to apply by brush, roller or spray and provides excellent coverage. Apply over fiberglass, metal, wood, and existing enamel paints. Gray and white colors, available in quarts and gallons.

 
IN STOCK
$30.25 / qt
qty.   
$30.25
$30.25
$80.84
$80.84
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content
  • VEHICLE TYPE: Oil modified alkyd
  • FINISH: High-gloss
  • COMPONENTS: 1
  • CURING MECHANISM: Air dry/oxidation
  • SOLIDS (theoretical):
    By weight...65.0 +/- 2%
    By volume...51.0 +/- 2%

  • COVERAGE: 545 sq. ft/gal.
  • VOC: 388 g/l max.
  • FLASH POINT: 110 degrees F

  • Surface Preparation: EZ Bilge performance is proportional to the degree of surface preparation. Follow recommendations carefully, avoiding shortcuts. Inadequate surface prep will virtually assure inadequate coating performance. Surfaces must be free of dirt, loose paint, rust, oil, grease, wax, soap and any other foreign matter. Clean painted areas by washing with a solution of two cups household ammonia per gallon of water and rinse well. Remove existing mildew with household bleach instead of ammonia.
Dry Time  To Touch  To Recoat 
90 Degrees F  1-1/2 
70 Degrees F  16 
50 Degrees F  24 
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

BRAND: Pettit Z-Spar
Type: Bilge Paint
4.8 6

Great sealer

5

Use in ventilation

Automd

Illinois

true

Good bilge paint.

5

I'm using this bilge paint in my S2, wherever water may be accumulating from the bow to the stern.

Rangerick

Colorado

true

Used it in the bilge and lockers

4

I'm working in a heated building during the winter. Temperatures only get in the mid 60S. I used the white paint in the bilge, under the cabin sole and the anchor locker: ie: wherever moisture would accumulate. I also used it in the storage lockers and any dark recesses to help brighten them up and make cleaning easier. Plan on two coats and paint it on thin. This paint is thin and will run, so any slope will pool excess paint which will then require days to dry. Excessive pooling has required me to wipe it off and repaint. Hardens very hard.

Rangerick

Colorado

true

Petit EZ bilge - not just for bilges

5

I used this product in conjunction with the performance enhancer to paint the inside of a wooden boat I am building. Using a low Knap roller and no tipping brush I got a great, smooth finish that is rock hard - and is standing up nicely to the rigors of boat construction very well. After floor boards are in it will see less abuse not more -

Johnny Tryon

Easton PA

good paint

5

thin paint but covers very well, used it on a large engine room on a 56' LCM

dbro10

osceola, fl

true

Bilge paint

5

Haven't used yet looks great

Boat man

Waupun, wi

true

Pettit EZ Bilge - High Performance Bilge Paint

4.86

100.0

Related Items:
TotalBoat Blogs Live Tech Support