EP-21 is a bottom coating for aluminum boats, that is a soft ablative, photoactive bottom coating that is biocide free. EP-21 is an environmentally friendly bottom paint that can be hauled and relaunched with out effecting the performance of the antifouling properties.
E Paint employs a novel mechanism to control the attachment of fouling organisms. When immersed in oxygenated water, E Paint photochemically generates minute levels of peroxides. The minute levels of peroxides make the surface inhospitable to the settling larvae of fouling organisms. Hydrogen peroxide is a potent, but short-lived chemical that has been used as an antiseptic, peroxides have been demonstrated to be effective antifouling agents. The peroxides do not persist in the environment because they quickly decompose back into oxygen and water by natural ions dissolved in the water.
The item was added to your wishlist.
The item was added to your shop cart.
Contain no copper or tin - ensures compatibility with aluminum and other metals in the marine environment (copper based paints promote galvanic corrosion with metal boats)
Coating Type - Copper and TBT-free Ablative matrix Vehicle
Flash Point - 70 deg F (21.1 deg C) Setaflash
Thinner - Not Recommended, Clean up with Mineral Spirts
Density - 13.1-14.7 lbs/gallon
Dry to Recoat - minimum 4 hours at 70 deg F (21 deg C); maximum not critical
Dry to Launch - minimum 15 hours at 70 deg F (21 deg C); maximum not critical
Solids by Weight - 70.6 - 77.2 percent
Solids by Volume - 46.3 - 53.7 percent
Theoretical Spreading Rate - 300 square ft/gallon at 3-4 mil DFT
Recommended Film Thickness - 4-6 wet mils to obtain 2-3 dry mils
Recommended Number of Coats - 3 coat minimum
EP-21 is designed to go over any properly prepared surface. Do not apply EP-21 over soft ablative coatings or unprimed metal. EP-21 is compatible with most anticorrosive coatings. Metal surfaces should be properly cleaned and primed before applying EP-21. Corrosion-inhibiting epoxy primers are recommended to afford better protection to the hull. EP-21 is formulated for easy traditional painting techniques.
Number Of Parts:
Aluminum Boat Paint
What primer do you recommend to use with EP-21 bottom paint? I'll be using it on an aluminum boat. Thank you respectfully Bob K.
Sorry just reread your question. We've used the ep- 21 paint for years- there was already paint on the bottom. So didn't use a primer. We've also used the spray on our outdrive. People complain about the thickness, but you get used to it.
Hi- yes. We've ordered often from Jamestown as they often have good prices. quick shipping, good product which we use on our aluminum boat. Gladly recommend!
Best Bottom Paint for The Price
Great Eco-friendly Economical Bottom Paint
This paint is too thick to be able to make a uniform coat, It also dries too quickly. Once you apply it on there's not much going back to level it off because it'll start to dry so quick that you'll find a bunch of sticky residue from the coat you just applied, sort of messing up the whole coat. The paint is good because it sticks very well, but being so sticky and thick doesn't give you much of a success in achieving an eye pleasing finished product. It looks like it was just slapped on, very uneven and major orange peel. It's just too difficult to apply without a thinner, by brush or roller. I only got it because it's environmentally friendly and the color gray, but now I'm not very pleased with the appearance of the product. Here's a thought - Make a thinner for it! How hard is that now? Otherwise I just can't recommend this product (feel like redoing my whole boat again with something else, but already spent too much on this product).