Owatrol Gelcoat Restorer returns dull, faded fiberglass to its original color, luster, and shine. Conventional waxes and polishes sit on the surface and dry out quickly. Unlike expensive polishes, Gelcoat Color Restorer is an oil that penetrates deeply into the fiberglass surface to re-wet the original pigment. It then dries to a durable, long lasting flexible finish.
Owatrol Gelcoat Restorer is easy to apply and simple to maintain.
Note: Not to be used on white gelcoat.
The item was added to your wishlist.
The item was added to your shop cart.
Restores original color and dries to a tough flexible finish.
Long lasting and penetrates deep into fiberglass.
Eliminates the need for waxes and polishes that sit on surfaces and dry out quickly.
Easy to apply - easy to maintain.
Works on fiberglass, plastic, paint, stone.
Horizontal or vertical surfaces.
Tools- brush or soft cloth
Choose an area that can be managed within five minutes. Excess GELCOAT RESTORER that dries on the surface may be removed with Marine Strip per label instructions
Wear protective clothing and gloves.
Cover areas you want to protect.
Apply between 41°F (5°C) and 95°F (35°C).
Do not apply in direct sunlight.
Use as is, do not thin.
Rinse the surface with fresh water. Remove dirt and heavy oxidation by scrubbing with Owatrol Deck Cleaner per label instructions. Allow surface to completely dry
Saturate a SOFT cloth with GELCOAT RESTORER and wipe it on.
With a SOFT cloth, wipe off excess within 10 minutes.
Gently polish with a lint-free cloth to a new sheen.
193 ft 2 (18 m2 ) per liter.
Actual coverage will vary depending on type, age and texture of surface.
Compounds Polishes Waxes
need to know if I can use this product for automotive paint? thank you.
Frankly, I don't know. It may work on some finishes but may not work on others. The only thing I know would be to try a small amount on an area that isn't too obvious. I'd try on my vehicle except they are new-gloss and I doubt it would prove anything.
I did not try it on a paint finish, but do not believe that it would be a good application.
How did it work? I have a 30 year old sailboat with faded, but clean gelcoat. Is it something I should consider? Thanks! Don
I really wish I could tell you how it works; unfortunately I have not received it yet and will have my boat in storage before I get it. So it will probably be next spring before I have a chance to test it out. Disappointed in the length of time itÂ’Â¢??s taking to get this product.
I would recommend this product to anyone restoring gel coat.
Follow the instructions on the can. Work methodically section by section and the difference will appear and inspire.
Lake Keowee in SC
Easy to use, outstanding results. Clean surface is essential. Wipe down surface with acetone after washing. Apply as directed. Looks like new.
A great product!
Brings back the color of faded gelcoat. Wipe it on, let it set for five minutes, wipe off gently then come back and buff gentlely. The original color will pop!