TotalBoat 5:1 Epoxy Kits Quart Group Size A
TotalBoat TotalBoat by Jamestown Distributors
  • TotalBoat 5:1 Epoxy Kits Quart Group Size A
  • TotalBoat 5:1 Epoxy Kits Gallon Group Size B
  • TotalBoat 5:1 Epoxy Kits 5.45 Gallons Group Size C

TotalBoat 5:1 Epoxy Kits

TotalBoat 5:1 Epoxy Kits include everything you need to tackle epoxy repairs and fiberglass projects. The complete project-ready epoxy kit includes: TotalBoat 5:1 epoxy resin; your choice of either fast or slow TotalBoat hardener; a set of metered mixing pumps, 2 stir sticks, 2 mixing pails, and a pair of latex gloves.

For convenience, pumps are color-coded to match the resin or hardener cap, and calibrated at a precise 5:1 ratio for a perfect 5:1 mix every time. All you do is mix ONE full pump of hardener to every ONE full pump of resin.

System Group Sizes: A - Quart Kit; B - Gallon Kit; C - 4.5 Gallon Kit.

Note: Don't need the pumps, gloves, stir sticks, or mixing cups? Gallon size kits are also available with just resin & hardener included. This 'no frills' version makes sense if you already have TotalBoat pumps and just need more epoxy.

IN STOCK - Available for pickup
Free shipping
$51.99 / ea
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content
TotalBoat Traditional Resin mixed with TotalBoat Fast or Slow Hardeners cures to an amber color, and is not suitable for clear-coating applications.

For clear-coating applications, use TotalBoat Crystal Clear Epoxy Kits (sold separately).

For extra long pot life and working time, use TotalBoat Tropical Epoxy Kits (sold separately).

Tip: Wash cured epoxy with water, scrubbing lightly with a Scotch-Brite pad to remove any amine blush prior to overcoating or painting.

Mix Ratio by Weight  100A (Resin) : 18B (Hardener)  100A (Resin) : 17B (Hardener) 
Mix Ratio by Volume  5A (Resin) : 1B (Hardener)  5A (Resin) : 1B (Hardener) 
Initial Mixed Viscosity at 75°F, cP  1,000  700 
Pot Life at 75°F, 150g mass, min.  12  20 
Work Life at 75°F, Thin Film, min.  60  90 
Cure Time at 75°F, Thin Film, hrs.  10 
Tensile Strength, psi  8,000  7,500 
Tensile Modulus, psi  410,000  460,000 
Tensile Elongation, %  3.5  4.5 
Heat Deflection Temperature  120  125 
Compressive Strength, psi  11,500  11,500 
Flexural Strength, psi  14,400  12,000 
Flexural Modulus, psi  460,000  450,000 
Cured Density, g/cm3  1.18  1.18 
Volumetric Yield in3/lb.  23.5  23.5 
Volumetric Shrinkage, %  4.4  4.4 
Hardness, Shore D  84  83 
Color  Amber  Amber 
Should I use this for clear-coating applications?  No  No 

Important Safety Information

Always wear protective clothing and equipment to protect your eyes, skin, and lungs when working with TotalBoat Traditional Epoxy Resin and Hardeners. Personal protective clothing should include appropriate gloves, safety glasses or goggles, a proper respirator, and a proper apron or similar protective clothing.

WARNING: The TotalBoat 5:1 Epoxy Slow Hardener can expose you to chemicals including bisphenol A, which is known to the State of California to cause female reproductive toxicity. For more information, go to

BRAND: TotalBoat
Material: Epoxy
Number Of Parts: Two Part
4.6 161

Total Boat Kit


Great product, easy to use. I recommend it.




Good product - Easy to use


I have several deck hatches to rebuild and selected TotalBoat products because of the support and informational videos I found online. I was concerned that the temperature was going to be to cold for the resin to harden correctly, but by morning everything looked great. I would recommend warming the resin before pumping though. I had some trouble and it took some time getting the material out of jugs. Otherwise a very good product to work with.


Bismarck, ND


Used on marine plywood


I thin it down a little so i could roll it out easier, take a while to dry if not heated garage.


Central pa


Great Alternative to West System


Compatible with West stuff. Dumped in the dispenser on top of the remaining WEST. Good product at great price.




I would buy this again!!! it mixes great has little bubbles


I used this for making an epoxy resin table out of a slab of ebony burl I liked the the way it cured i over all like it




bottles leaked about half - made a mess


when I got the order - one of the boxes with the epoxy kit had leaked. Apparently the pouring caps on the part A & B were loose and the foil sealer underneath weren't sealed either allowing about half of they're contents to leak during shipment - contacted customer service-fellow there said foil caps should have been sealed and didn't believe these weren't - denied replacement. Bought several hundred dollars materials from them - not too happy about this - be careful on their shipments - good products though


daytona beach


I would purchase this again


works great thank you again


Akron OH


I recommend it


Worked great on my small wooden boat project. Old Ozark 14ft Jonboat with oars. Plywood and Pine plank with the Epoxy over woven strand epoxy mat.


Flippin, AR


Works great to fill wood slabs


I bought this to fill cracks and holes in live edge wood slabs. I like that it's very easy to mix the correct ratio of part A & B epoxy without having to use a measuring cup. Then I add a few drops of black dye, mix it for 30 seconds or so, then pour into the wood. This could not be any easier. I purchased the slow-cure kit, but now that I've used it I'll buy the fast-cure next time. Thanks for a great product!

Tom R

Grand Haven, MI


This is the good stuff!


A complete no brainer, one pump of each, stir thoroughly and expect expert results. It has virtually no smell, pours like light Karo syrup, and sets up like glass. Yeah, it is messy! What else were you expecting when working with epoxy? That is why they include the gloves. It is good idea to buy a pack of extra gloves if you need to mix more than 3 or 4 batches.


Ocean Springs, Ms

5:1 Traditional Epoxy Kits



Related Items:
TotalBoat Blogs Live Tech Support Free Catalog