TotalBoat Marine Wood Finish
TotalBoat TotalBoat by Jamestown Distributors
  • TotalBoat Marine Wood Finish
  • Marine Wood Finish

TotalBoat Marine Wood Finish

TotalBoat Marine Wood Finish is a protective wood treatment for teak and other wood above the waterline. This flexible, breathable finish provides exceptional weather protection. It's easier to apply and maintain than traditional varnish, with no sanding between coats necessary.

Marine Wood Finish penetrates deeply into the wood pores to create a rich, warm finish, enhancing the natural beauty of your boat's wood. A unique linseed oil and resin formula contains advanced UV inhibitors for greater protection, durability and longevity. Keep your woodwork looking beautiful with the least amount of maintenance necessary.

Goes on like a paint - looks like a varnish

Available in Teak, Satin, and Gloss finishes. Teak is suited for teak and other dark hardwoods. Gloss may be applied over Teak and Satin, but can also be used as a base coat.

 
IN STOCK - Available for pickup  
Free shipping
$29.99 / qt
qty.   
$29.99
$29.99
$29.99
$52.99
$52.99
$52.99
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content

Preparation & Application Tips:

  • Use mineral spirits for solvent & cleanup.
  • Ensure surface is clean, dry, and free of dust oil and grease prior to varnishing.
  • Sanding is not necessary between coats if applied within 72 hours of each other.
  • For a seal coat with maximum penetration into wood, thin your first coat of TotalBoat Marine Wood Finish with 50% mineral spirits.
  • For best results, apply a minimum of two coats over the seal coat.
  • Additional coats may be applied for further depth and appearance.

FREE QUICK-START KIT INCLUDED WITH ANY PURCHASE:

  • (2) 2" Foam Brush
  • (1) Pair of Large Latex Gloves
  • (2) Plastic Mixing Pots
  • (2) 10" Wooden Stir Sticks

 

BRAND: TotalBoat
Number Of Parts: One Part
Type: Linseed Oil
4.4 18

REVIEW SNAPSHOT®

by PowerReviews
TotalBoat Marine Wood Finish
 
4.4

(based on 18 reviews)

Ratings Distribution

  • 5 Stars

     

    (11)

  • 4 Stars

     

    (5)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (1)

94%

of respondents would recommend this to a friend.

Pros

  • Even paint distribution (7)
  • Easy to clean (3)

Cons

No Cons

Best Uses

  • Detailed work (7)
  • Large areas (4)
  • Small areas (4)
    • Reviewer Profile:
    • Avid do-it-yourselfer (9), Casual do-it-yourselfer (5), Professional (4)

Most Liked Positive Review

 

Excellent Product!!

I used this product for the first time on a 45 year old teak swim platform. The prep work was considerable and tedious getting years of old finishes off and then bleaching the wood....Read complete review

I used this product for the first time on a 45 year old teak swim platform. The prep work was considerable and tedious getting years of old finishes off and then bleaching the wood. But when I started applying Total Boat the project became fun because the application is so simple and the results are just outstanding! Five coats of Total Boat (no sanding required between coats)and the finished product looks like the best varnish job I ever did. My only suggestion outside of the instructions on the can is to thin with mineral spirts to obtain good brushing characteristics (just like you would do with varnish). This is a great product, I can't wait to start the next project refinishing the handrails.

VS

Most Liked Negative Review

 

This is a Tinted NOT Clear Finish

This is not a clear finish to be used for wood other than teak. The natural teak tinting will darken other more porous wood.
The marketing label should clearly state the contents...Read complete review

This is not a clear finish to be used for wood other than teak. The natural teak tinting will darken other more porous wood.
The marketing label should clearly state the contents when it also states for use with other wood.

Reviewed by 18 customers

Displaying reviews 1-10

Back to top

Previous | Next »

 
5.0

Great teak finish!

By The Skipper

from Western New York

About Me Avid Do-It-Yourselfer

Pros

  • Even Paint Distribution

Cons

    Best Uses

    • Teak woodwork

    Comments about TotalBoat Marine Wood Finish:

    Easy instructions. As long as you do the necessary prep work (sanding to 320, cleaning thoroughly with tack and mineral spirits), this finish goes on easy, smooths out nicely, and looks fantastic! I thinned the first coat to allow for better absorption. I'll never go back to regular teak oil again!

     
    4.0

    Great over bare wood, not good over epoxy

    By Joe

    from San Jose Ca

    About Me Casual Do-It-Yourselfer

    Verified Buyer

    Comments about TotalBoat Marine Wood Finish:

    Applied it over epoxy, still sticky after several weeks; so I light sanded it, and that got it tolerable. But over bare wood, works great and leaves nice shine with just one or two coats, which dries to the point of not being sticky generally in 1 to 3 days.

    (2 of 2 customers found this review helpful)

     
    5.0

    Excellent Product!!

    By Bill

    from Livermore, CA

    About Me Avid Do-It-Yourselfer

    Verified Buyer

    Pros

    • Easy clean-up
    • Easy to apply

    Cons

    • None

    Best Uses

    • Teak Above The Waterline

    Comments about TotalBoat Marine Wood Finish:

    I used this product for the first time on a 45 year old teak swim platform. The prep work was considerable and tedious getting years of old finishes off and then bleaching the wood. But when I started applying Total Boat the project became fun because the application is so simple and the results are just outstanding! Five coats of Total Boat (no sanding required between coats)and the finished product looks like the best varnish job I ever did. My only suggestion outside of the instructions on the can is to thin with mineral spirts to obtain good brushing characteristics (just like you would do with varnish). This is a great product, I can't wait to start the next project refinishing the handrails.

     
    5.0

    I bought this product twice

    By Chas

    from Long Valley, NJ

    About Me Casual Do-It-Yourselfer

    Verified Buyer

    Pros

      Cons

        Best Uses

        • Large Areas
        • Small Areas

        Comments about TotalBoat Marine Wood Finish:

        I used it on outdoor teak furniture. Chairs and table.

         
        5.0

        Excellent Product!!

        By Bill

        from Livermore, CA

        About Me Casual Do-It-Yourselfer

        Pros

        • Beautiful Finished Job
        • Easy clean-up
        • Easy to apply
        • Easy To Stir

        Cons

        • None

        Best Uses

        • Detailed Work
        • Large Areas
        • Small Areas
        • Teak Above The Waterline

        Comments about TotalBoat Marine Wood Finish:

        I used this product for the first time on a 45 year old teak swim platform. The prep work was considerable and tedious getting years of old finishes off and then bleaching the wood. But when I started applying Total Boat the project became fun because the application is so simple and the results are just outstanding! Five coats of Total Boat (no sanding required between coats)and the finished product looks like the best varnish job I ever did. My only suggestion outside of the instructions on the can is to thin with mineral spirts to obtain good brushing characteristics (just like you would do with varnish). This is a great product, I can't wait to start the next project refinishing the handrails.

         
        5.0

        Great product, works better than anything I've used before

        By BOBP

        from BRAINTREE, MA

        About Me Professional

        Verified Buyer

        Comments about TotalBoat Marine Wood Finish:

        Use a 50% thinned primmer coat then one or two coats right out of the can and a final coat of gloss. The results are amazing.

        (0 of 1 customers found this review helpful)

         
        5.0

        Refinish Teak Swim Platform

        By Bill

        from Livermore, CA

        About Me Avid Do-It-Yourselfer

        Verified Buyer

        Pros

          Cons

            Best Uses

            • Detailed Work
            • Large Areas
            • Small Areas

            Comments about TotalBoat Marine Wood Finish:

            This is the most incredible product I have ever used!I refinished a 45 year old teak swim platform by sanding down to bare wood and applying 5 coats of Total Boat Marine Wood Finish. I used the foam brushes that Jamestown included (never have used foam before) and have a beautiful finished project that I'm proud of. Applying the product is so simple. If you can varnish at all you'll love the simplicity of this product. No runs or sags and no "dry" spots that show up later as with varnish. My only suggestion is to thin the product with mineral spirits enough to get good brushing charactristics. The label on the can will suggest that thinning is not necessary.

             
            5.0

            TotalBoat Wood Finish

            By Pastor phil

            from Charleston, SC

            About Me Avid Do-It-Yourselfer

            Verified Buyer

            Pros

              Cons

                Best Uses

                • Detailed Work

                Comments about TotalBoat Marine Wood Finish:

                Product covered varous tints of the wood with a uniform coat. The shine of the satin has drawn positive comments. First time using product so I am watching for durability and when a touch up will be required after my three coats.

                 
                4.0

                Thompson restoration

                By jwdeats

                from Bristol new york

                About Me Avid Do-It-Yourselfer

                Verified Reviewer

                Pros

                • Quality product

                Cons

                • Hard To Get Even Coat

                Best Uses

                • Bright Work

                Comments about TotalBoat Marine Wood Finish:

                I used an impregnated foam roller for a great finish. I had issues with a bristle roller

                (1 of 1 customers found this review helpful)

                 
                4.0

                Thompson restoration

                By joe

                from Bristol new york

                About Me Avid Do-It-Yourselfer

                Verified Buyer

                Pros

                • Easy to use
                • Easy To Use Very Quality
                • Even Paint Distribution

                Cons

                • A Bit Too Thick

                Best Uses

                • Finishing Bright Work On Gunales
                • Large Areas

                Comments about TotalBoat Marine Wood Finish:

                This was on a Thompson lapstrake to finish the un painted wood. Great coverage in 2 coats.

                Displaying reviews 1-10

                Back to top

                Previous | Next »

                Related Items:
                JD on Facebook Live Tech Support Jamestown Forum Free Catalog