3M Scotch-Weld EPX Plus II 10:1 Plunger is required to properly dispense 3M Scotch-Weld DP8005 and DP8010 Plastic Adhesives.
This item is no longer available.
The item was added to your wishlist.
The item was added to your shop cart.
The 3M Scotch-Weld EPX Plus II 10:1 Mixing Nozzle simultaneously meters, mixes, and dispenses the 3M Scotch-Weld DP8005 and DP8010 Plastic Adhesives. The 10:1 Mixing Nozzle is sold separately (Item No. 3M-051115-69043).
The 3M Scotch-Weld EPX Plus II Applicator applies two-part adhesives with a squeeze of the trigger. The EPX Plus II Applicator is used to Dispense 3M Scotch-Weld Adhesives in Duo-Pak Cartridges.
The EPX Plus II Applicator is sold separately. (Item No. 3M-99327)
The 3M Scotch-Weld EPX Plus II Applicator is supplied with (1) 1:1 Ratio Plunger and (1) 2:1 Ratio Plunger
worked as designed.
Used with 8005
As an engineer, I did a bit of research on bonding polypropylene, even going to pH D friend from 3M. The 3M gun was well designed and easy to use. 150-grit prep, alcohol wash, and then glue. Also used fiber glass cloth to reinforce some areas (not pretty, but tough) and the results were great. Highly recommend the Scotch Weld 8005 for hard-to bond products.