Sherwood impellers fit a variety of pumps in marine applications, including marine engine water pumps and bilge pumps. It is common practice to inspect and replace flexible impellers annually as preventative maintenance against pump failure. Spare water pump impellers for the engine coolant system should be kept on board.
Sherwood recommends neoprene impellers for engine cooling pumps and nitrile for bilge pumps or transfer duties where water is heavily contaminated with oil or diesel. (Part numbers ending in K designate impeller kits which include impeller, gasket and o-ring.)
Check links tab for link to Manual/Parts Book. Useful for cross-referencing pumps to impeller.
The item was added to your wishlist.
The item was added to your shop cart.
Number of Vanes
I own a 1971 chris craft 17' Lancer with a 225bvc/250 Volvo-penta I/o, the cooling raw water pump is a sheerwood/Detroit /A-16, what impeller do I need to order?
It shows SHE-09959K
JD Tech Team
Will the Sherwood 17000K fit proper replacement of a Sherwood 17000A?
The 17000A is a threaded impeller with a thru key. The 17000K is just a thru key design slot they are both the same size.
JD Tech Team
What is the impeller needed for a caterpillar C -18 engine?
No clue. Sorry!
Contact cat with both the model and serial number.
Have cat part no. 7E0321. What is sherwood no for the cat impellar?
I cannot remember how I came up with the correct replacement part number using the Sherwood impeller. It may have been just a comparison of size. Try looking in your manual and they may give replacement part numbers
I don't know the Sherwood #, but have the NAPA number SHE-09959K.Hope that is some help.
part number for impeller for Onan Marine MDKBR generator?
this is not a question.
Sorry I do not know. The implor is on board and locked downfor the winter. Jamestown wil have the cross over numbers
Have no idea. You, JT should be able to help help.
does kit 10615k come with a gasket?
a couple different gaskets
Will this impeller fit a 1959 Jabsco model 12050?
The impeller I bought is for a Cummins B6BTA engine. I'm sure it won't fit a Jabsco pump.
Sorry. I don't know. My knowledge is limited to the 1988 Ski Supreme I have.
Don't know. Are you able to get enough design specs to cross reference
You need to look it up. Check Depco pumps for a cross reference.
Does the kit for a Sherwood 1700k also include a new key?
I don't think so but it has been so long ago I am not sure.
No, only what you see in the picture.
Hello,I have a Sherwood water pump 302648. What is the part number for the impeller?Thanks
Looked up number on Sherwood site and they give impeller part # 09000K for kit.The pump is obsolete and the replacement pump is G908Hope this helps.
what's in the kit?
some lube and various gaskets/o-ring, only one you will probably use
A single impeller. My pump needs two, so I bought two kits.
Everything you would need to replace that impeller is included in the kit.
The kit has both impeller & paper washer required for replacing a used impeller, but no c-clip washer. For my Sherwood pump I needed a c-clip expander with sharper points since I tried to re-use the existing. There is a great YouTube video on changing Sherwood Impellers.
Was not as well made as in the past
It just doesn't look as well made as the ones I have replaced in previous years. It could be better that previous years but doesn't look it. Only time will tell!!
I originally ordered the wrong size part and you guys shipped me the correct replacement before I even had a chance to return the original part.
Happy my boat is fixed!
New Orleans, LA
Did just what it should do
I bought a impeller for my water pump and it fit!!
Great product.Great service.
Great product. Fast delivery. Thank you!Will use your services again.
Sherwood Impeller for Yamaha sterndrive
Only distributer that sold a OEM replacement for a Yamaha sterndrive impeller. The provided reference charts were a great help.
Prior Lake MN
The Sherwood impellers were perfect
The impeller is a spare and is not yet installed, but appears perfect.
The impellers are OEM quality. The price from Jamestown Dist. is less than half that of the engine manufacturer, who sells the identical product in the original box placed inside their own box (i.e. ripoff.)
Would buy it again
It is like an EOM replacement and at a better price.
Lajas, Puerto Rico
Great price for OEM part!
The parts book was easy to use to identify my pump model, how it works and how to properly service it. The impeller is in place and works like "new" and I have the spare on-board now.