Trident Flex Marine Wet Exhaust Water Hose is a premium certified wet exhaust hose used for longer bend connections. It features thick tube construction and external cover with wire helix between 2 ply reinforcement.
These hoses also feature excellent flexibility and bend radius. They resist heat, ozone, fumes and will not collapse. Exhaust hoses should always be double clamped when installing. Many different diameter sizes and lengths are available for just about any exhaust system. The smaller diameter sizes can be used for engine intake, critical water, drain, scupper bilge and sanitation uses.
The item was added to your wishlist.
The item was added to your shop cart.
Exceeds all Marine Exhaust Standards.
What is the OD of the 4" dia hose?
OD is just under 4 1/2"
I am looking for this as 1 5/8" I.D. X 12.5 feet long. Can I get this in one piece?
I ordered a 3" at 12.5' and they shipped it to MN in one section, so yes.
they only ship in 10 foot long box. if it can be rolled they may be able to ship it
do you sell 6 inch by the foot?
Shortest length is a 4' section.
Hardwall exhaust pipe
Excellent pipe for my radiator application, good flex, excellent strength
Hard to ship
Was not told that a 12.5 foot section would need to be cut to ship. Shipping was delayed because of this.
Pompano Beach Florida
Not as flexible as expected
This was used on my 89 Challenger Bayliner as an exhaust.The pipe did not flex as well as I thought it should. It was very difficult to install and started to collapse a little on one side when bent to install. The old exhaust bent more easily. I would not buy this one again, if it had to be at a slight bend to install.
GOOD QUALITY PRODUCT
GOOD NEW QUALITY NOT OLD STOCK LAYING AROUND FOR YEARS