Sealand Traveler toilet and self-contained freshwater marine sanitation system. A vitreous china bowl is rinsed with fresh water from an on-board demand system, removing the smells or unpleasant odors associated with saltwater flushing toilets. Effective rim wash uses about a pint of fresh water per flush, saving water each time.
The Sealand Traveler sanitation system requires no electricity and is an ideal replacement for recirculating toilets.
The item was added to your wishlist.
The item was added to your shop cart.
No recirculating chemical smell.
Water level and flushing action controlled by single pedal control.
Halfball seal keeps tank odors in tank.
Holding tank is molded of durable linear low-density polyethylene with 9.5-gallon capacity.
Discharge connection is 1-1/2 hose insert.
Vent connection is for 5/8 inch hose.
Water connection is 1/2 inch MPT.
Requires no electricity.
Integral anti-syphon vacuum breaker.
Can the tank be mounted with a drain flange on the bottom?
It has a Discharge connection is 1-1/2 hose insert.
JD Tech Team
When you refer to an on-demand water system (a separate tank)- will this require a water pump
The manual states that it can have a fresh water supply pressure of 5-80 PSI, so this may be dependent on how your toilet would be setup.
JD Tech Associate
How high or tall is sealand m28?
Hello -Just google Sealand M28 marine traveler and click on images. If you go to a diagram from MarineSan you will see all you need. Or just go to m a r i n e s a n dot com and click on "gravity traveler toilets." Then click on the M28 and you will see a "dimension" button.Good luck,Mark Fitzgerald
Dimensions: 20"H x 18-7/8"W x 18-3/4"D
how wide tall deep ?
Same as a toilet in your home only slightly taller. The unit works great. It pumps out easily and was a huge improvement to my 28' boat.Best
Hello from Maine,The Dometic 711-M28 tank is 18-7/8" wide x 9-1/8" high x 17-1/8" deep. The whole system toilet and all is 18-7/8" wide x 20-5/8" high x 19-1/4" deep. If you go to dometicsanitation dot com click on products then 711-M28 and you can see a PDF of the entire system and its installation. You can also download that file. Good luck,Mark Fitzgerald
how do I connect it to dump? Seems there two holes on the holding tank...one smaller, and one bigger...and the bigger one seems to have a VENT plug in it. I have a macerator pump if I can figure out, (diagrams would help,) how to hook up a way to dump it or pump it. When I got the thing, I figured the dump hole would be on the BOTTOM...or at least on the side! Since it's on TOP though...I need to figure out how to PUMP it out I guess?!? Anybody know where there might be some installation diagrams?
is the water stored in the toilet itself or is a seperate water tank needed?
Sir. I had the mechanic at the marina where I store my boat in the winter hook the unit up.I only wish my legs were a tad longer but other wise it's a great unitBestDave berger
A solid product
The toilet was easy to assemble and install. I works great and is easy to operate. Plus, it was very reasonably priced.