You told us you loved Thixo, but wanted more adhesive per tube. We listened. Thixo Pro is our top selling thickened 2:1 epoxy adhesive, in a larger 450ml dual cartridge package. That's 2.5 times more. If you are working on a large project, Pro is the way to go. You'll save time, have less waste, and get more adhesive for your money.
Standard 185 ml Thixo cartridges fit regular caulking guns. To dispense Thixo Pro, you need our Pro Gun. This manually operated, two component applicator is specifically designed for use with Pro cartridges. A powerful 26:1 trigger ratio lets you place a bead of adhesive exactly where you want it.
Cartridges and Pro Gun sold separately. Choose from the drop down below to select. Each cartridge includes two mixing tips. Additional mixing tips are also available in two packs and quantities of 12 or 60.
The item was added to your wishlist.
The item was added to your shop cart.
Our solution for everything: more stuff, no hassle, no cleanup, less waste.
This convenient project-ready epoxy adhesive is ideal for large gap-filling projects and structural repairs below/above the waterline. Thixo is non-sagging a thixotropic epoxy that will stay put on any vertical or overhanging hard to reach corner. It cures to a hard, translucent surface that can be drilled, painted, or sanded. This no-mess, no-hassle versatile 2:1 epoxy system comes equipped with two free static mixing tips to ensure accurate mix ratio upon application every time.
Ideal working temperatures range from 50-80 degrees F.
Thixo Pro Series fits a dual cartridge 2:1 dispensing gun (resin 300ml + hardener 150ml). Additional tips sold separately.
Hardness, Shore D
Tensile Strength (psi)
Tensile Modulus (psi)
Tensile Elongation (%)
HDT, Post cured (deg F)
Compressive Strength (psi)
Flexural Strength (psi)
Flexural Modulus (psi)
Tensile Adhesion (wood) (psi)
Tensile Adhesion (aluminum) (psi)
Tensile Adhesion (G10) (psi)
Resin Density @ 77degF (lb/gal)
Hardener Density @ 77degF (lb/gal)
Resin Color - Part A
Hardener Color - Part B
Thixotropic Index (1/10 RPM)
Mix Ratio by Weight
Mix Ratio by Volume
Gel Time @ 77degF, 150g mass (mins)
Vertical Sag Resistance (in)
THIXO PRO GUN
300 x 150
WARNING: This product can expose you to chemicals including bisphenol A, which is known to the State of California to cause female reproductive toxicity. For more information, go to www.P65Warnings.ca.gov
As one reviewer noted this product has a limited shelf life. I opened a new cartridge the other day that I purchased last fall. The product would not feed out of a new mixing tip. I was able to take off the tip and dispense the epoxy onto a board and mix it myself but it did not mix well. It seemed the epoxy part (not the hardener) had partially gone bad. Again this was a new unopened cartridge that was stored inside. What is the shelf life of this item?
Epoxy is always best when fresh. I try to use mine within 6 months.Technically, some epoxies can be reconstituted by warming them up a bit.115 or so. You can extend shelf life of epoxies by keeping them underrefridgeration.Ideally, I try to order only what I need, and reorder when needed.Michael
Shelf life should be over a year. If it was stored in cool temperatures under 50 degrees it could gel up. Try putting it in some warm water and see if that helps.
JD Tech Team
How long will a tip stay fluid?
Craig in California
Yes, this gun can adapt for 1:1 or 2:1 sized chambers for this style tube, and will work.
Does this gun work with the SP Spabond 345 Epoxy Resinor can I get the sp gun to work with thixo pro 2:1?
I tried using a similar gun and just made a mess. I would suggest you purchase the correct gun to get the correct application. Good luck!
I will buy this product again
After using total bolt penetrating epoxy I use this product to fill holes in the bottom of some rotten window sashes it works beautifully. It doesn't sag on vertical surfaces. And using small waxed wooden pieces on the edges makes for a perfect Edge.
Very convenient to use. Good quality epoxy. My only complaint is the poor shelf life. Only buy it to use when you need it. open a new pack lst week and wound up throwing it in the trash.
This is my Third case of this product ðŸ‘�
On boat related projects both wood and fiber glass,doesn't sag and no mixing needed, very easy to use.
THIS STUFF REALLY LETS ME LAY DOWN A NICE BEAD OF EPOXY JUST AS YOU WOULD LAY DOWN A BEAD OF CAULK. I CAN MAKE NICE FINE FILLETS ON WOODEN LAPSTRAKES. THE GUN IS SOMETIMES TOUGH TO GET INTO TIGHT SPACES, BUT I LIKE THESE LARGE TUBES BECAUSE I DO NOT HAVE TO STOP TO RELOAD AS OFTEN AS WITH SMALLER TUBES. CHEAPER TO BUY PER OUNCE TOO.