You told us you loved Thixo, but wanted more adhesive per tube. We listened. Thixo Pro is our top selling thickened 2:1 epoxy adhesive, in a larger 450ml dual cartridge package. That's 2.5 times more. If you are working on a large project, Pro is the way to go. You'll save time, have less waste, and get more adhesive for your money.
Standard 185 ml Thixo cartridges fit regular caulking guns. To dispense Thixo Pro, you need our Pro Gun. This manually operated, two component applicator is specifically designed for use with Pro cartridges. A powerful 26:1 trigger ratio lets you place a bead of adhesive exactly where you want it.
Cartridges and Pro Gun sold separately. Choose from the drop down below to select. Each cartridge includes two mixing tips. Additional mixing tips are also available in two packs and quantities of 12.
The item was added to your wishlist.
The item was added to your shop cart.
Our solution for everything: more stuff, no hassle, no cleanup, less waste.
This convenient project-ready epoxy adhesive is ideal for large gap-filling projects and structural repairs below/above the waterline. Thixo is non-sagging a thixotropic epoxy that will stay put on any vertical or overhanging hard to reach corner. It cures to a hard, translucent surface that can be drilled, painted, or sanded. This no-mess, no-hassle versatile 2:1 epoxy system comes equipped with two free static mixing tips to ensure accurate mix ratio upon application every time.
Ideal working temperatures range from 50-80 degrees F.
Thixo Pro Series fits a dual cartridge 2:1 dispensing gun (resin 300ml + hardener 150ml). Additional tips sold separately.
Hardness, Shore D
Tensile Strength (psi)
Tensile Modulus (psi)
Tensile Elongation (%)
HDT, Post cured (deg F)
Compressive Strength (psi)
Flexural Strength (psi)
Flexural Modulus (psi)
Tensile Adhesion (wood) (psi)
Tensile Adhesion (aluminum) (psi)
Tensile Adhesion (G10) (psi)
Resin Density @ 77degF (lb/gal)
Hardener Density @ 77degF (lb/gal)
Resin Color - Part A
Hardener Color - Part B
Thixotropic Index (1/10 RPM)
Mix Ratio by Weight
Mix Ratio by Volume
Gel Time @ 77degF, 150g mass (mins)
Vertical Sag Resistance (in)
THIXO PRO GUN
300 x 150
Questions & Answers about TotalBoat Thixo Pro 2:1 Epoxy System:
2015-04-18DALTON BERGAN asked: Does this gun work with the
SP Spabond 345 Epoxy Resin
or can I get the sp gun to work with thixo pro 2:1?
2015-04-23JIM BISBEE: I tried using a similar gun and just made a mess. I would suggest you purchase the correct gun to get the correct application. Good luck!
2014-09-26A shopper asked: Can this epoxy bond Wood to Ceramic Tile ?
2014-09-27JON BARTNICK: I never used it in that way but it seems like it would! I'm sure it would on the porous side of the tile.
2014-09-28JIM BISBEE: I purchased the double tube of thixo and should have also purchased the gun. Instead I used one of my old paint & body double gun applicators and made a mess. I ended up having to hand mix what was left. One of the plungers did not fit properly, causing the plug in the small tube to pop sideways. Don't make the same mistake I made, get the right tool for the job. In this case it's the thixo gun Jamestown sells!
2014-09-28JIM BISBEE: Why would you want to use epoxy for tile?
Comments about TotalBoat Thixo Pro 2:1 Epoxy System:
THIS STUFF REALLY LETS ME LAY DOWN A NICE BEAD OF EPOXY JUST AS YOU WOULD LAY DOWN A BEAD OF CAULK. I CAN MAKE NICE FINE FILLETS ON WOODEN LAPSTRAKES. THE GUN IS SOMETIMES TOUGH TO GET INTO TIGHT SPACES, BUT I LIKE THESE LARGE TUBES BECAUSE I DO NOT HAVE TO STOP TO RELOAD AS OFTEN AS WITH SMALLER TUBES. CHEAPER TO BUY PER OUNCE TOO.
Was this a gift?:
Bottom Line Yes, I would recommend this to a friend