Quantum 45 Epoxy Primer Reducer
Quantum Quantum
  • Quantum 45 Epoxy Primer Reducer

Quantum Epoxy Primer Spray Reducer

This reducer may be used with both Quantum two-part epoxy primers (Quantum 45 surfacing and Quantum HB high build) to achieve desired film thickness and appearance when applying primer by spray, brush, or foam roller. Though not normally necessary, it may be used to reduce by up 10-20% by volume of the mixed primer.

Quantum Spray Reducer is available in quart and gallon sizes.

 
IN STOCK - Available for pickup
$26.25 / qt
qty.   
$26.25
$50.00
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content
Use Quantum45 Epoxy Primer Spray Reducer when the temperature of your substrate (application surface) is 45°F to 125°F.
Induction Period: Allow mixed material to stand for 30 minutes prior to reduction and application.
Reduction (QuantumHB High Build Epoxy Primer): A 20-30% reduction by volume of the admixed paint or varnish with Quantum45 Epoxy Primer Spray Reducer may be used for proper application, film thickness control, and a smooth film appearance.
Reduction (Quantum45 Epoxy Surfacing Primer): A 10-20% reduction by volume of the admixed primer with Quantum45 Epoxy Primer Spray Reducer may used for desired appearance and film thickness control.
Note: See Quantum45 and QuantumHB Primer How To guides (at left) for complete mixing and application details.

Warning: Do not apply paint materials to surfaces less than 5°F above dew point, or to surfaces warmer than 125°F. Substrate temperature should be minimum 45°F to maximum 125°F.

BRAND: Quantum
Type: Additives
Related Items:
TotalBoat Blogs Live Tech Support