TotalBoat Inflatable Boat Antifouling Bottom Paint
TotalBoat TotalBoat
  • TotalBoat Inflatable Boat Antifouling Bottom Paint

TotalBoat Inflatable Boat Bottom Paint

TotalBoat Inflatable Boat Paint provides barnacle and growth protection for inflatable boats used in both fresh and salt water. This ablative antifouling paint is specifically formulated for Hypalon, PVC, and rubber boats. It dries to a durable, flexible coating that allows inflatables to be deflated and rolled up without the paint cracking.

TotalBoat Inflatable Boat Paint is water-based, so it can be thinned with water, if needed, and cleaned up with water when you're done painting. Easy to apply by brush, roller, or spraying.

Available in Gray, in a Quart size can, which is typically enough for two coats on an 8 to 10 ft inflatable.

Bonus: Each order includes 2 stir sticks, and 2 quart size paint pots.

Free shipping
$53.99 / kt
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content

Inflatable Boat Paint Features

  • Ideal for Hypalon, PVC, and rubber inflatables
  • Ablative antifouling repels barnacles and growth
  • 25% Cuprous Oxide copper content released at a controlled rate for reliable performance
  • Paint won't crack or flake off when boats are deflated and rolled up
  • EPA approved water-based formula is environmentally friendly, easy to apply, and easy to clean up
  • Easy to apply by brushing, rolling (3/16'' nap or foam solvent-safe roller cover), or spraying (airless or conventional)
  • No toxic solvent fumes or harsh odors
  • No launch time restrictions. You can paint now and launch later.
  • Suitable for both fresh and salt water use


  • Type: Water-based antifouling
  • For use on: Inflatable boats made of hypalon, pvc, or rubber
  • Size: Quart
  • Cuprous oxide content: 25%
  • Recoat dry time: 3 hours @ 70°F
  • Launch dry time: At least 6 to 10 hours after final coat, depending on temperature. No maximum time.


Thinning  Water, up to 10% 
Cleaup  Water 
Surface Prep Solvent - Rubberized Materials  TotalBoat Epoxy Primer Thinner 200 
Surface Prep Solvent - Fiberglass, Metals, Wood  TotalBoat Dewaxer & Surface Prep (do not use on Rubber, Hypalon, or PVC) 
Coverage  125 sq. ft./quart. One quart is enough for two coats on an 8-10 ft. inflatable boat 
BRAND: TotalBoat
Number Of Parts: One Part
Type: Inflatable Boat AF Paint
4.8 9

Excellent Product for Inflatable Boat.


Painted my inflatable boat bottom in the beginning of spring. Kept the boat in the water all summer hauled it today and marine growth was minimal. The boat was kept at a marina near Lake Erie in fresh water. I recommend this product.

Rick A.

Trenton, Michigan.


Worked very well on my new inflatable and my old one!


Being water based really helps with cleanup and multiple applications.


Westerly, RI and Port Charlotte, FL


I recommend this product


Applied to new inflatable and it went well




no brainer,good stuff


used on rubber boat enough paint, easy to apply, looks good, bottom stays clean(have only been in two weeks)

bob the boat guy



waiting for end of season for final eval.


I'll need to wait until the end of season for final evaluation. It went on very easily after wiping inflatable bottom down with alcohol as recommended by the video.


Cape Cod


Great Product


Application was a snap. The true test will be when I pull my dinghy out of the water at the end of the season and see how easy it is to clean. Wish I had done this years ago.


Sandusky Ohio


Amazing paint


I used Forespar's waxy "green" product meant for inflatables and prop shafts-terrible, both covered with all kinds of marine growth at the end of the season. This year for the first time I used the Total Boat inflatable bottom paint. The dinghy remained in the water for about 3 months and when hauled at the end of the season, it had only a thin film of slime on the bottom that came off with a sponge as well as a minor green "beard" at the stern waterline that needed a little elbow grease and a Scotch Brite. The bottom cleaning took about 10 minutes vs. 2 hours last year. Oh, and I only used 1 quart for two coats so I'll get another season out of it.

Brian M.

Hingham, MA


Paint is easy to apply


Applied this dinghy paint just last week, so I don't know how it will hold up. It was easy to apply the two coats. Waited four hours between coats and another day before launching per the directions.


Sandusky, OH

Smart move


You just need to make sure the boat is clean and dry before you paint. This is the way to go if you plan on leaving your inflatable in the water. It went on better than other similar paints I've used in the past. While the dinghy stays on the dock when we aren't on the boat, it comes with us pretty much everywhere since we sail to Block Island, Martha's Vineyard, Nantucket, Long Island etc in the warmest months, so antifouling paint on a pvc boat is NOT the frivolity one might think.

The Sneak

South Kingstown, RI


TotalBoat Inflatable Boat Bottom Paint



Related Items:
TotalBoat Blogs Live Tech Support