TotalBoat Inflatable Bottom Paint
TotalBoat TotalBoat
  • TotalBoat Inflatable Bottom Paint

TotalBoat Inflatable Bottom Paint

TotalBoat Inflatable Bottom Paint provides barnacle and growth protection for inflatable boats used in both fresh and salt water. This ablative antifouling is specifically formulated for Hypalon, PVC, and rubber boats. It dries to a durable, flexible coating that allows inflatables to be deflated and rolled up without the paint cracking.

TotalBoat Inflatable Paint is water-based, making it easy to apply by brush or roller, and easy to clean up with just soap and water. Light gray paint is sold in quart sizes, which is typically enough for 2 coats on an 8 to 10 ft inflatable.

Bonus: Each order includes a free pair of gloves, 2 stir sticks, and 2 quart size paint pots - a $10 value.

 
IN STOCK - Available for pickup
Free shipping
$51.99 / kt
qty.   
$51.99
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content

Features:

  • Ideal for Hypalon, PVC, and rubber inflatables
  • Ablative antifouling repels barnacles and growth
  • 27% Cuprous Oxide copper content released at a controlled rate for reliable performance
  • Paint won't crack or flake off when boats are deflated and rolled up
  • EPA approved water-based formula is environmentally friendly, easy to apply, and easy to clean up
  • Apply by brush or roller
  • No toxic solvent or fume odors
  • No launch time restrictions. You can paint now and launch later.
  • Suitable for both fresh and salt water use

Specifications:

  • Type: water-based antifouling
  • For use on: inflatable boats made of hypalon, pvc, or rubber
  • Size: Quart
  • Cuprous oxide content: 27%
  • Coverage: 100 sq ft per coat, approximately 2 coats on an 8 to 10 ft inflatable
  • Recoat dry time: 4 hours
  • Launch dry time: At least 8 to 12 hours after final coat. No maximum time

 

Thinning  Not recommended 
Cleaup  Soap and water 
Surface Wipe prior to Application - Hypalon, PVC, and rubber tubes and bottoms  Contact boat manufacturer for recommended surface wipe to clean hull before application of TotalBoat Inflatable Bottom Paint 
Surface Wipe prior to Application - Fiberglass & Aluminum RIBs  TotalBoat Dewaxer & Surface Prep (do not use on Rubber, Hypalon, or PVC) 
BRAND: TotalBoat
Number Of Parts: One Part
Type: Inflatable Boat AF Paint
4.8 8

Worked very well on my new inflatable and my old one!

5

Being water based really helps with cleanup and multiple applications.

JJB

Westerly, RI and Port Charlotte, FL

Yes

I recommend this product

5

Applied to new inflatable and it went well

Jjb

Westerly

Yes

no brainer,good stuff

5

used on rubber boat enough paint, easy to apply, looks good, bottom stays clean(have only been in two weeks)

bob the boat guy

RI

Yes

waiting for end of season for final eval.

4

I'll need to wait until the end of season for final evaluation. It went on very easily after wiping inflatable bottom down with alcohol as recommended by the video.

VenChar

Cape Cod

Yes

Great Product

5

Application was a snap. The true test will be when I pull my dinghy out of the water at the end of the season and see how easy it is to clean. Wish I had done this years ago.

Steve

Sandusky Ohio

Yes

Amazing paint

5

I used Forespar's waxy "green" product meant for inflatables and prop shafts-terrible, both covered with all kinds of marine growth at the end of the season. This year for the first time I used the Total Boat inflatable bottom paint. The dinghy remained in the water for about 3 months and when hauled at the end of the season, it had only a thin film of slime on the bottom that came off with a sponge as well as a minor green "beard" at the stern waterline that needed a little elbow grease and a Scotch Brite. The bottom cleaning took about 10 minutes vs. 2 hours last year. Oh, and I only used 1 quart for two coats so I'll get another season out of it.

Brian M.

Hingham, MA

Yes

Paint is easy to apply

4

Applied this dinghy paint just last week, so I don't know how it will hold up. It was easy to apply the two coats. Waited four hours between coats and another day before launching per the directions.

MikeP

Sandusky, OH

Smart move

5

You just need to make sure the boat is clean and dry before you paint. This is the way to go if you plan on leaving your inflatable in the water. It went on better than other similar paints I've used in the past. While the dinghy stays on the dock when we aren't on the boat, it comes with us pretty much everywhere since we sail to Block Island, Martha's Vineyard, Nantucket, Long Island etc in the warmest months, so antifouling paint on a pvc boat is NOT the frivolity one might think.

The Sneak

South Kingstown, RI

Yes

TotalBoat Inflatable Bottom Paint

4.88

100.0

Related Items:
TotalBoat Blogs Live Tech Support Free Catalog