TotalBoat Trailer-Mounted Boat Lift
TotalBoat TotalBoat by Jamestown Distributors
  • TotalBoat Trailer-Mounted Boat Lift
  • Trailer-Mounted Boat Lift
  • Trailer-Mounted Boat Lift

TotalBoat Trailer-Mounted Boat Lift

The TotalBoat Trailer-Mounted Boat Lift is a safe, stress-free way to raise a boat weighing up to 10,000 pounds up to 12" above the bunks or rollers, by yourself. Do routine maintenance with your boat still securely attached to the trailer.

This simple but ingenious system uses four lifts attached to your trailer and positioned under the four strongest areas of the boat: hull chines, stringers, and transom. While raising the boat, it's easy to keep the load balanced by turning the adjustable rod on each lift one half turn at a time. As your boat lifts up off of the trailer, it remains stable and secure because the lifts are attached firmly to the trailer itself.

Sturdy, adjustable lifts are extremely easy to configure to accommodate a wide range of boat shapes and sizes. No more hoists or dangerous improvised solutions! See below for fit information.

 
IN STOCK - Available for pickup
Free shipping
$599.99 / kt
qty.   
$599.99
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content
Important Fit Requirements

The Trailer-Mounted Boat Lift System requires minimum clearance heights where each lift is mounted:

Make sure there is a minimum of 12" clearance from the ground to the bottom of your trailer frame. Additionally, the distance from the top of the trailer frame to the chines must be no less than 10".

Boats with very low trailers and or low rise from the trailer to the boat may lack sufficient clearance. The lift is designed for use on trailer beams 2" to 3" wide and 4.5" to 5.75" tall.

Please inquire if you have any questions whatsoever.

Features

  • Constructed of solid steel, including handles and nuts, each lift stand has a lift capacity of 2,500 pounds (1,134 kg)
  • 1-7/16" ACME threaded center rod provides smooth adjustment under load
  • Top plates swivel on ball joints with an 18° articulation in all directions
  • Made and tested in the USA to ensure the best quality available to maximize safety
  • Stands may be mounted either inside or outside the trailer piping.
  • Stands have 2 (Short and Tall) configurations to suit different boat and trailer designs

 

BRAND: TotalBoat
Type: Portable Boat Lifts
4.4 16

Very close to being awesome

4

As others have said you have to have a very narrow trailer beam for them to fit. Mine is like a small I Beam, I think most trailers these days are. They would not fit without a lot of effort and some engineering. Once they are on they work well and are solid.

TonyH

South Florida

Yes

Handy and innovative design.

4

Thought the painted finish a little cheap, could've been a little better quality finish. Thought the lifting pads would've had maybe a rubber pad.

Capt Don

Manatee River, Florida

Yes

How did I live without it!!!!

5

This is the best tool I have bought in a long time. This is a must have item for both the professional and Diy'er as well. The ONLY negative is the threads are not long enough to accommodate all trailers and a 2x4 block was used between the lower plate and trailer to take up the space. Just supply different bolts and it would be perfect.

Boatman

Long island Ny

Yes

Great product but read the measurements and fine print!

4

I am restoring a 25' Cuddy ~ 5500lbs. I read from another review they did not read the fine print and all of the measurements required. The plates used to secure the jacks to the trailer were too short, the solution they used was 1/4 flat bar, remade the plates and corrected the shortage. Since my boat is so large, fiberglass hardtop with aluminum framed windows and I am in a confined space I did not want to risk dropping from the trailer on to blocks. I re-made the plates 2" larger in depth, fits snug, used bolts that came with kit and they work as advertised. The product does clearly say what is needed. Here is the kicker, I did measure and was not going to buy these as I have the same issue, however since they succeeded, shared their story, I can confirm this can be done on the larger I beam trailers! Just wish you guys could include a 2nd set of plates to accommodate this issue.

2t2Operator

Summerville, SC

Yes

Excellent worked great.

5

Easy to order and receive. Neighbors are jealous.

Bryan

Seattle

Yes

Great job

4

Good product. Takes about one hour to install. Need to raise evenly. I hot out of kilter. And cracked my t top

Ccs

Falmouth ma

Yes

Works Good

5

Works good for a 25' Contender. It's safe but be smart. Could use longer pipes for more leverage.I can walk in boat but don't.

Wavelength Charters

Wilmington, NC

Yes

Great product and working great for my boat project

5

Trophy 1802FJ boat has been on the lift system going on 2+ weeks now and it's holding like a champ. No worries at all. I was able to work with the mounting design for a near perfect install on my trailer. You have many different options to mount the lifts. I was by myself and 60 minutes from unboxing to boat lifted off off the bunks.

Ray

Lynchburg, VA

Yes

I would buy again

4

I did not check the spec sheet prior to buying......my bad. It does not fit large aluminum I-beam trailers that are common in South Florida. I ended up building wooden frames for the jacks and lifting the boat from the ground. Sometimes a man has to improvise.

Steve the improvisor

Miami,FL.

Yes

If you do the best work yourself then it's a gotta have item

5

Great idea vs ground stands. Really heavy duty material and construction. Easily mountable if your patient. Only wish I had these before I paid an outrageous price to initially paint my boat bottom. At least now I can maintain it myself and save $$$...

RNJ

South Jersey

Yes

TotalBoat Trailer-Mounted Boat Lift

4.416

100.0

Related Items:
TotalBoat Blogs Live Tech Support Free Catalog