Jabsco General Purpose Pump
ITT Jabsco Jabsco 11810 ac motor pump
  • Jabsco General Purpose Pump

Jabsco General Purpose Pump

Jabsco 11810-Series Bronze AC motor pump is used for bait tank circulation, oil transfer, wash down, and general purpose needs, also applicable to food and beverage, home, industrial, plumbing and contractor use.

This self-priming pump will produce a suction lift approaching 10 feet when dry and a lift up to 22 feet when primed. Be sure suction lines are airtight or pump will not self-prime. Features a bronze construction, nitrile impeller and stainless steel sleeve over motor shaft.

Pump may be mounted in any position without loss of efficiency; however, it is suggested that the pump head be down if vertical mounting is desired. The rotation of the motor shaft determines the location of the pumps intake and discharge ports.

IN STOCK - Not available for pickup  
$616.94 / ea
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content
Note: Do not pump solvents, thinners, highly concentrated or organic acids. Damage to pump may result. If corrosive fluids must be handled, pump life will be prolonged if pump is flushed with water after each use or after each work day.


  • 110 V AC powered, comes with 8 foot cord and grounded plug
  • Not recommended for Dry Running. Unit depends on liquid pumped for lubrication. Do not run dry for more than 30 seconds.
  • Pressures: For continuous operation, pressure should not exceed 20 psi.
  • Temperatures: Nitrile impeller recommended for liquid temperatures of 50 degrees to 180 degress F.
  • 3/4 inch (19mm) Garden hose external thread and 1/2 inch NPT internal.
  • Motor: 1/3 HP, 115V AC 60 HZ, 1725 RPM, Single phase, capacitor type.
  • Replaceable waterplate.
  • Lip type shaft seal.


Type: General Purpose Pumps and Accessories
Related Items:
TotalBoat Blogs Live Tech Support Jamestown Forum Free Catalog