Free shipping on orders over $99.99! Don't miss out!
$62.49 Out of Stock
AFI Deluxe Stainless Steel Adjustable Pantographic Wiper Arms
$62.49Out of Stock
AFI Deluxe Stainless Steel Adjustable Pantographic Wiper Arms
Ask a Question
3
Based on 1 Reviews
  • 5 Star

    0%

  • 4 Star

    0%

  • 3 Star

    100%

  • 2 Star

    0%

  • 1 Star

    0%

AFI Deluxe Stainless Steel Adjustable Pantographic Wiper Arms Customer Questions and Answers

5 of 5 Questions

Question

I have a 1991 Holiday Rambler Alumi Lite Class A RV. Will this fit my RV? My double arm wiper arm broke.

Asked on 12/01/2014 by Undisclosed

Top Answer

Well.....there are three variables, the way the blade mounts. This has a flat metal tab. The unit attaches to a motors that have round grooved shaft. There is a flat metal support that goes over the shaft first and needs a screw thru it to keep from spinning. The length of the arm is very specific to the window, make sure you order the right one! Unit works well for me, heavy but not quite commercial. Good luck Jonathan

Answered on 12/01/2014 by JONATHAN MILLER
See More Answers (3)

Answer

It has 4 adjusents to fit window spans, check the spans out for your application.

Answered on 12/01/2014 by LON WALTERS

Answer

I installed this on a replica Ferrari P4. I located it on the centerline of the windshield. I would think you could use it on your RV as long as you are doing one windshield side. This will only operate one windshield wiper. Hope this helps.

Answered on 12/02/2014 by JOHN MASTROIANNI

Answer

If the mounting plate (rectangular with a shaft though one end and a retaining screw on the other end) looks like the picture then it should work fine as it is fully adjustable for length. It is a well made product.

Answered on 12/01/2014 by JOHN JACKSON
Answer Question

Question

Does anyone have these installed on a Wellcraft St. Tropez? if so what do I need to get to install on mine?

Asked on 06/18/2015 by Todd Soper

Top Answer

i installed this on a fiberglass kit car. If you have enough room below the windshield to mount the motor then it should work.

Answered on 06/18/2015 by JOHN MASTROIANNI
See More Answers (1)

Answer

I dont have Wellcraft but just installed on Kadey KROGEN.If u have good access and a motor that matches with these arms, then the installation is very easy.they come with allen wrench.getting old ones off will b hardest part.lining up and adjusting new ones is a little tricky so be patient.

Answered on 06/18/2015 by WARD BERG
Answer Question

Question

How are they adjustable. One of my blades only clear the lower part of the window?

Asked on 02/01/2012 by Ray Martin

Top Answer

Thanks for input. How are they adjusted? Couldn't find anything on the web.

Answered on 02/06/2012 by Ray Martin
See More Answers (1)

Answer

This arm assembly is designed to keep the blade in a verticle straight up and down position as it travels from one side of the glass to the other, giving it a clear swipe that is as tall as the wiper blade is long.The length of the blade depends on the size of the glass top to bottom.

Answered on 02/03/2012 by CAPT BARRY BEHELER
Answer Question

Question

Does this wiper come with the cast piece that attaches to the motor shaft?

Asked on 06/28/2015 by Undisclosed

Top Answer

the wiper arm has spline female connection with 2 set screws that connect to the wiper spline. also a plate with shaft that mounts to threaded motor shaft and one mounting hole. if you are not sure on the length go with the longer one, it can be shortened.

Answered on 06/28/2015 by Jim to many bikes Jim to many bikes
Answer Question

Question

The AFI adjustable pantographic wiper on the starboard front window of my boat cleans well; however, the port window wiper does not remove the water. The wiper rotates over the window but doesn't seem to have any downward force. I presume the wiper arm can be adjusted but I have not been able to obtain any instruction. My hit and miss approach doesn't seem to be doing any good. I would appreciate any comment regarding the manner of adjusting the wiper arm.? Thank you, Ray Martin

Asked on 03/27/2013 by Ray Martin

Top Answer

I had a similar problem. Mine was solved by just pressing down to get the blade edge on the glass. Good luck.

Answered on 03/28/2013 by MICHAEL SULLIVAN
Answer Question
1 of 1