Awlgrip G3010 AwlCat #2 Topcoat Converter is to be used with Awlgrip when spraying only or with AwlCraft 2000.
**Awlgrip G3010 curing solution is a clear liquid with solvent odor, Class IB flammable liquid.**
First Aid - Eye Contact Immediately wash eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention.
First Aid - Skin Contact Wash skin with soap and water. If product permeates clothing, remove clothing and wash skin with soap and water. If irritation persists, seek medical attention. Launder clothing before wearing again.
First Aid - Inhalation Move exposed person fresh air immediately. Get medical attention if breathing is difficult.
First Aid - Ingestion If swallowed, seek medical attention immediately.
Spills Eliminate all ignition sources. Stop or control spill. Do not allow material to enter sewers or ground. Isolate for proper disposal. Wear appropriate safety items.
Handling and Storage Grounding or bonding of containers is recommended before material transfer. Storage areas should be dry and well ventilated.
Exposure/Personal Safety and Protection Work in a well ventilated area. Wear an appropriate respirator such as a NIOSH-approved one. Wear appropriate goggles, face shields etc. Use impermeable gloves and protective clothing as necessary to prevent skin contact. Do not eat, drink, chew tobacco or gum, or apply cosmetics while working with this product. Wash hands after use.
Potential Health Effects
Eye Severe irritation with redness, pain, tearing, and the possibility of significant injury after direct splash to eye. Vapors may cause eye irritation with redness and minor discomfort of the eye. Overexposure to isocyanate products can cause eye irritation.
Skin Moderately irritating with possible redness and discomfort. Prolonged contact may cause burns with redness and pain. May cause dry skin by dissolving skin oils. Contains a component which can be absorbed through the skin in harmful amounts. Overexposure to isocyanate products can cause skin irritation. It can also lead to skin sensitization. The reaction may include rash, itching, hives, and swelling of the arms and legs.
Potential Health Effects - Inhalation Moderately irritating to nose, throat, or breathing passages. May cause unconsciousness by depressing the central nervous system after prolonged exposure to high concentrations. May increase ricks for sudden death from irregular heart rhythms caused by stressful conditions that increase the levels of adrenalin in the blood. Overexposure to isocyanate products can cause nose, throat, and lung irritation. It can also lead to lung sensitization. Symptoms may include coughing, wheezing, tightness in the chest and shortness of breath. Sensitization may develop as a result of a large single overexposure or from repeated overexposure at lower levels. Respiratory (lung) sensitization can result in strong asthmatic response to future airborne exposures, even at levels well below the TLV.
Potential Health Effects - Ingestion Moderately irritating to the mouth, stomach, and digestive system. No ingestion exposure expected with normal occupational use.
Potential Health Effects - Chronic Hazards Chronic exposure can cause redness and irritation of the membrane that covers the eyeball and the inside of the eyelids (conjunctivitis). Frequent or prolonged skin contact may cause irritation or rash (dermatitis). May cause dry nose and throat, an abnormal sensation of prickling or tingling of the skin, tremors, apprehension, impaired memory, weakness, nervous irritation, dizziness, nausea, loss of appetite, headache, increased liver size, abnormal increase in bone marrow cell numbers, low red blood cell count, and kidney damage. In conjunction with chronic alcohol use, can increase potential for toxicity from repeated exposure to aromatic hydrocarbon in this product. Awlgrip G3010 Curing Solution can accumulate in the body with daily exposure. Chronic ingestion is unlikely due to the method of use or physical properties of the product.
Stability and General Avoid contact with heat, open flame, sparks, or other ignition sources. If moisture enters the container, carbon dioxide gas may form and cause container lid to bulge or pop off.
Phasellus suscipit tincidunt tristique. Quisque mattis euismod ipsum, ac accumsan ante fermentum non. Vestibulum eget auctor lorem. Integer euismod justo nulla, nec ultricies ipsum pulvinar in. Duis sed fringilla turpis, at ultricies orci. Nam est turpis, consequat nec feugiat a.
Praesent sodales et ipsum
Mauris congue justo sit amet lacus sagittis, a tempor lectus tempus. Suspendisse quis nulla ac nibh accumsan tincidunt ac quis tortor. Proin dignissim aliquam odio, sed bibendum urna sagittis dapibus. Aenean ut tristique ante, sit amet ultrices nisi. Praesent eu dapibus augue. Mauris tempus suscipit ipsum, et malesuada tellus euismod eu. Quisque consequat turpis id feugiat lacinia. Vestibulum sit amet elementum augue. Quisque tempus ligula vitae placerat pulvinar. In egestas sodales lorem, id egestas lacus pharetra eget. Sed ac mi placerat, placerat nulla ut, imperdiet nunc. Mauris at felis vehicula, commodo est eu, ullamcorper purus.