Get Free Shipping on your order now! Don't miss out!
Back To Nature

Back To Nature Ready Strip Paint Overspray & Spatters Remover

$10.95Limited StockSee Product Details
Back To Nature Ready Strip Wash
Quantity
Only 1 left
1 qt contains 1 qt

This item is eligible for free shipping

Product Details

Back To Nature Ready-Strip Overspray & Spatters Remover gently removes the residue and softened layers sometimes remaining after paint or varnish removal. It also helps remove stains from wood. This environmentally safe, water-based solution contains no harsh chemicals or methylene chloride, is nonflammable, and is very easy to use.

It works on interior and exterior surfaces including wood, plaster, concrete, brick, stone, metal, marble, fiberglass, veneers, etc. Do not use on sheetrock (drywall), plastic, rubber or linoleum surfaces.

Info & Guides

DIRECTIONS FOR USE:


  1. Use immediately after paint or varnish removal.
  2. If bottom layers appear intact, or surface is very tacky or gummy, then there is paint or varnish remaining on the surface. Therefore, reuse Back to Nature Paint & Varnish Removers as directed before applying Ready-Strip Overspray & Spatters Remover.
  3. Apply Ready-Strip Overspray & Spatters Remover liberally onto the surface. Allow Ready-Strip Overspray & Spatters Remover to stay on the surface approximately 1-2 minutes.
  4. Use a clean cloth, stripping pad, or nylon brush to scrub surface with Ready-Strip Overspray & Spatters Remover. On wood, rub back and forth along the grain of the wood.
  5. Wipe with a clean cloth. If possible, rinse.
  6. Use a second application where necessary.
  7. After surface is clean, wipe down with a dry cloth and let dry a minimum of 24 hours. Surface should be completely dry before refinishing.
  8. If after using Ready-Strip Overspray & Spatters Remover, stubborn paint or varnish remains on the surface, reuse Back to Nature Paint & Varnish Remover and repeat application of Ready-Strip Overspray & Spatters Remover, where necessary.

Technical Information

Safety Compliance Data

  • SCAQMD Compliant
  • OTC Compliant
  • CARB Compliant

SAFETY AND FIRST AID: Rubber gloves and safety glasses are recommended for eye and skin protection. Avoid eye contact. If eye contact occurs, immediately flush with plenty of water for 15 minutes. Avoid prolonged and repeated contact with skin. If skin contact occurs, wash with soap and water. Do not take internally. If swallowed do not induce vomiting. Give 1 or 2 glasses of water and call a physician immediately. Provide adequate ventilation in confined areas. KEEP OUT OF REACH OF CHILDREN.