Get Free Shipping on your order now! Don't miss out!

Festool StickFix Rubin 2 Abrasives for Delta DS 400 EQ Sander

$33.00Limited StockSee Product Details
Festool StickFix Rubin 2 Abrasives for Delta DS 400 EQ Sander
Quantity
Only 2 left
1 pk contains 1 pk

This item is eligible for free shipping

Product Details

Rubin Abrasive 2 sheets for the Festool DS 400 DS Delta Sander with Stickfix hook and loop attachment. Rubin 2 sandpaper is typically used for sanding bare soft and hard woods, sanding composite materials, and sanding paints and varnishes.

StickFix is the Festool brand name for hook and loop (H&L) sandpaper, 4" x 6".

50 sheets per pack

Tech Specs
Item Number Grit Quantity
FES-499133 P40 50/bx
FES-499134 P50 50/bx
FES-499135 P80 50/bx
FES-499136 P100 50/bx
FES-499137 P120 50/bx
FES-499139 P180 50/bx
Rubin 2 ApplicationsSuggested GritProcess Level
WoodP24 - P60heavy duty
WoodP80 - P120intermediate
WoodP150 - P180prep for finish
Info & Guides

Rubin 2 abrasive was developed for natural wood, wood composites and veneers. Rubin has a special coating which sheds wood fibers. Use on hardwoods like oak or maple, soft woods like pine or fir, tropical woods like ebony or teak, as well as on wood-based products.

  • Use grits P24 to P60 for rapid removal and rough surface quality. High material removal means low surface quality. This preps surfaces for higher grits.

  • Use grits P80 to P120 to accomplish intermediate sanding. You will still have a fast removal rate while achieving good surface quality.

  • Use grits P150 to P180 for finish sanding. Remember that soft wood does not require as fine a sanded finish as hardwood. If you want to sand wood higher than P180, use Brilliant 2 from P220 to P400. Sanding higher that P180 is not recommended for stains, as they will not penetrate as readily.

    Tip

    Use coarser grits for faster results; avoid skipping grits for best surface quality. The wood-specific coating for the Rubin abrasives means that they are long lasting.