Plexus Primer/Conditioner PC120 is a chemical primer and conditioner designed for Plexus adhesives used on aluminum and stainless steel. Plexus PC120 acts as a cleaner to remove contaminants on the metal surface, in many cases replacing routine solvent cleaning. The active ingredients in this primer increase the bonding resistance against salt water.

Instructions for using Plexus Primer/Conditioner PC120: Brush or wipe a thin film on the metal being treated. Apply enough of a thin layer so a red tint is visible. Lightly wipe to leave a thin layer behind. Wait 1 to 3 minutes (at ambient temperatures), and once the primer is dry, apply the adhesive.

Info & Guides

PC120 recommended for use on Plexus adhesives

MA300

MA310

AO420

MA422

MA425

MA550

MA555

Handling and Safety
PC120 is flammable. Keep containers closed after use. Avoid skin and eye contact. Wash with soap and water after skin contact. In case of eye contact, flush with water for 15 minutes and get medical attention. Harmful if swallowed. Keep out of reach of children. Keep away from heat, sparks, and open flames.

Data Sheets

PC 120 Technical Data sheet

VIEW