1 kt contains 1 kt

This item is eligible for free shipping on orders over $99.99

Product Details

Teleflex Hydraulic Fill Kit for all inboard/outboard, outboard, and inboard Seastar hydraulic helms. Kit includes fill tube and push-pin to vent. Check filling system periodically for leaks. If leaks are found, correct before using. Failure to correct a leak can lower the oil level in your boat's steering system, resulting in loss of steering. Not intended for former Teleflex hydraulic systems, except the SyTen System. For outboards only.

One single station requires 2 quarts of Seastar hydraulic fluid to fill.

Info & Guides

Technical Information

  • Helms mounted with wheel shaft completely horizontal must be filled to bottom of filler hole at all times. Do not allow oil level to drop more than 1/4 inch (6.3 mm)
  • Helms mounted on a 20-degree angle or with the wheel shaft vertical should have an oil level within 1/2 inch (12.7 mm) of hole

Reviews for Teleflex Hydraulic Fill Kit

2 of 2 Reviews

June 10, 2020

Worked great, but over priced!
By PAS from EHT, NJ

Verified Purchase

the product worked great! Easy to use and steering is back in order. Kept me from going to the local marina for $125/hr. But, it could have cost half the price and I'm sure they would have still made 1000% on it. I was in a pinch and needed to get it done.

Bottom Line Yes, I would recommend to a friend

Was this review helpful to you?

December 27, 2015

Works great. Much better then trying to rig something up.
By Paniola from texas

Simple, easy to use, and very effective.

Bottom Line Yes, I would recommend to a friend

Was this review helpful to you?