Teleflex Dual Function Mechanical Controls

Technical Reference Manual

NOTE: When properly installed, these engine controls will connect to outboard, stern drive and inboard engines, utilizing Mercury/Mariner and OMC OEM type control cables as well as universal 3300/33C type cables and engine connection kits.

*Cut-off switches normally function as follows (without lanyard installed on switch): Inboard and Stern Drive - switch open; Outboard - switch closed.

Cut-off switch is not available for top mount controls.

(dual-function control- each lever controls throttle AND shift)

This is the most sure-handling, comfortable control you can buy. A shapely, balanced grip provides an incredibly smooth yet solid feel- with power trim always comfortably at hand. Side mount AND top mount models offer neutral interlock and warm-up- and they can use any OEM or universal 3300/ 33C type control cable!

Applications:

For single station use with nearly any engine.

Features:

Side and top mount single-lever versions.
Dual function lever controls both throttle and shift of one engine.
Neutral interlock and startin- gear protection (available even on top mounts!)
Optional Trim in the handle for each model. No relay required.
Neutral engine warm-up feature.
Tilt switch available for each model.
Optional, lanyard-style cut-off switch for emergency engine shutdown.
Friction adjustment feature included.
"Easy-On" cable design accepts virtually every type of OEM and 3300/33C type cable.
Easily adapted to push or pull cable actuation mode.
Mechanical advantage 2.38:1
Meets/exceeds all applicable standards.
Made in the U.S.A.